Skip to content

Welcome guest

Please login or register

Free Motion Quilting Designs and Where Each One Belongs

You don't need five hundred designs. A free motion quilting design is any line you can stitch without lifting the needle, and that is the whole test. If you can trace it on paper in one continuous pass, your machine can quilt it, and most of the designs that look complicated on a finished quilt are one simple shape repeated at a different size or in a different direction.

That is worth knowing before you spend a winter learning motifs. You need three or four free motion quilting designs you can stitch without thinking, and a clear idea of which one belongs in a border, which one fills a plain block, and which one covers a whole quilt top without drawing attention to itself. Which three or four is further down. First the machine has to stop feeding.

What free motion quilting is

Machine quilting splits into two kinds of work. In the first, the feed dogs are up and the machine pulls the layers through while you steer. That is walking foot quilting, and it gives you straight lines and soft curves. Your walking foot feeds the top layer at the same rate the feed dogs feed the bottom one, which is what keeps a quilt from puckering.

In free motion quilting the feed dogs are dropped or covered. The machine stops feeding anything. Nothing moves unless your hands move it, which means you decide exactly where the needle goes, and tight curves and freehand shapes become possible. Longarm quilting reaches the same freedom from the other direction, by moving the machine head over a quilt held still, but everything in this guide is written for a home sewing machine.

There is a good way to feel this before you thread anything. Put a pencil on a sheet of paper, hold the pencil still, and draw by moving the paper underneath it. That is free motion quilting. Your hands do the work the feed dogs used to do.

Walking foot quilting with the feed dogs up and the machine feeding the quilt, next to free motion quilting with the feed dogs down and the hands feeding the quilt in any direction, and the pencil and paper test

The first hour is awkward. That is the hour where your hands learn to do what the feed dogs used to do, and it is not a sign that your machine is wrong or that you lack some talent other people have.

Setting your machine up for free motion quilting

Four changes turn an ordinary sewing machine into a free motion machine, and every one of them matters.

The four changes that set a sewing machine up for free motion quilting: feed dogs dropped, darning foot fitted, straight stitch throat plate, and stitch length set to zero

Drop or cover the feed dogs. Modern machines usually have a sliding switch, and your manual will say where. If your machine is old enough that the feed dogs don't drop, cover them instead. Tape a rectangle of thin cardstock securely to the throat plate and punch a hole in it for the needle to pass through.

Fit a darning foot. You may see it sold as a free motion foot or an embroidery foot. It is spring loaded, so it hops up and down with the needle instead of pressing the layers flat, and that hop is what lets you move the quilt. Many are made of clear acrylic so you can see what you are stitching. An open toe version gives you the best view of all.

Swap to a straight stitch throat plate if you have one. The hole is smaller, so there is less room for the quilt to get pushed down into the machine. You get more regular stitches and fewer skipped ones.

Set the stitch length to zero. This surprises people. With the feed dogs down the dial isn't controlling anything anyway, because your stitch length now comes from two things: how fast the machine is running and how fast your hands are moving. Setting it to zero simply stops the feed teeth moving at all. Select a straight stitch with the needle in the center position and disengage the dual feed foot if your machine has one.

Thread, needles, and what your stitches are really made of

A machine quilting needle needs to be sharp enough to pierce three layers cleanly. Match the size to the loft of your batting: a 75/11 for thin batting, moving up to an 80/12 or a 90/14 for thicker ones. Put a new needle in at the start of every project, not when the old one starts skipping.

For thread, cotton in the top and cotton in the bobbin is the reliable choice, and it is what most quilters reach for. A 40 or 30 weight cotton is the usual pick for machine quilting, and a 50 weight gives you a finer line that sits down into the fabric more. Monofilament nylon is useful when you want the stitching to disappear, and it comes clear for light fabrics and tinted for dark ones.

One thread to keep away from your machine: hand quilting thread. It has a wax coating that will damage the tension discs.

If your thread keeps breaking, check the needle first. It may be the wrong type or too small for the thread you have chosen. Thread can also come off the spool too fast, so if your machine allows it, try standing the spool vertically.

The nine designs, and where each one belongs

Free motion quilting designs do different jobs. Picking the wrong one is why some quilts end up with a few areas stitched to death and the rest looking bare, and why some quilting fights the piecing underneath it instead of setting it off.

Four of the nine below are not free motion work at all. In the ditch, outline, echo and crosshatch are normally worked with a walking foot, and they are here because most quilts need both kinds. Those four are also what you stabilize a quilt with before any of the free motion work starts.

In the ditch walking foot
Follows the seam lines and barely shows. It belongs anywhere you want to hold the layers without adding pattern, and it is the first pass that stabilizes a quilt.

Outline or contour walking foot
Echoes a shape at a set distance, usually 1/4in or 3/8in. It belongs around patchwork pieces and applique motifs.

Echo walking foot
Repeated lines rippling outward like waves from a shore. It belongs around a single strong motif, and it is a feature of Hawaiian applique.

Crosshatch or grid walking foot
Straight or diagonal lines crossing. It belongs in plain areas and in blocks you want to emphasize, and it is quick to work.

Meander free motion
A wandering line that never crosses itself. It belongs in backgrounds and in all over quilting where the texture should not compete.

Stippling free motion
The same wandering line worked tightly. It belongs in small areas you are filling, and it pushes corded quilting and trapunto into relief.

Loops free motion
A traveling line with a full loop dropped in at intervals. It belongs in borders and sashing, and in all over work when a plain meander reads too quiet.

Motif free motion
A drawn shape, small or elaborate. It belongs in plain blocks, medallion centers, border corners and sashing keystones.

Repeat pattern free motion
A linear design that repeats, like a cable or a feather. It belongs in borders and sashing.

Nine quilting designs drawn as dashed stitching lines: in the ditch, outline, echo and crosshatch worked with a walking foot, and meander, stippling, loops, motif and repeat pattern worked free motion

Two rules of thumb are worth carrying around. A busy pieced top with a lot of small pieces usually wants one all over pattern rather than a different idea in every block. And curved quilting on linear piecing, or linear quilting on curved piecing, gives you contrast that a matching design never will. A Rail Fence block is all straight lines, so curves break it up in a way that looks deliberate. A Log Cabin takes an easy all over diagonal well.

You might also let the fabric decide for you. Look at the prints you used. Stars, hearts, circles, flowers, and leaves turn up constantly in quilting cotton, and any one of them can become the motif you quilt. The four designs that follow cover most of what you will ever need, and the first of them needs no marking and no plan at all.

Meandering and stippling, the first design to learn

The meander is where nearly everyone starts, and it deserves that place. It has no beginning and no end you have to plan for, it needs no marking at all, and it forgives an unsteady hand better than anything else you can stitch.

The line wanders in curves and loops that do not cross each other, so the finished texture looks a little like the pieces of a jigsaw puzzle fitted together. Work from one corner, across and down the area you are filling, and keep two things as steady as you can: the length of your stitches and the density of the pattern.

The trap is gaps. It is easy to leave a wide empty patch and only notice it once the quilt is off the machine, so look ahead of the needle rather than at it, and decide where you are going next before you get there.

Worked tightly, the same line is called stippling. Worked loose and open, most quilters call it meandering. It is one movement at two scales, which is a useful thing to understand early: a great many free motion quilting designs are one shape at a different size.

Loops and travel stitching

A loop is the meander with a decision added. Instead of wandering, you travel along and drop a loop in as you go, then travel on.

The traveling line between the loops, sometimes called travel stitching, is doing real work. It gives you a moment to look ahead and choose your next spot, and when you stitch yourself into a corner, a longer traveling line is how you get back out to open fabric without cutting your thread.

Loops change character with very small adjustments. Make them tall instead of round and you get a different texture entirely. Cluster two or three together, then travel, then cluster again, and the quilt reads as rhythm rather than as a filler. Alternate them up and down along a line and you have a border design.

Four free motion designs built from one loop: the plain loop, the tall loop, clusters of three with travel stitching between, and loops alternating above and below the line as a border

Mary from Mary Go Round Quilts builds eight designs out of nothing but this one movement, including one that deliberately crosses over previously stitched lines, which she notes is the thing quilters are usually told not to do. We wrote all eight up, with her video, in one loop, eight free motion designs.

Echo quilting

Echo quilting is the easiest way to make one shape look important. You stitch around a motif, then stitch around that line, then around that one, and keep going outward. The lines ripple away from the center like waves from a shore.

It works by hand or by machine, and it needs no marking, because each line is spaced off the one before it. Keep the spacing consistent and the effect is calm and deliberate. Let it drift and it starts to look like a mistake, so this is one where slowing down pays.

Quilting motifs, and the one way no stopping rule

A motif is any drawn shape you follow with the needle, from a small leaf to an elaborate medallion center. Mark it on the top and stitch the lines.

There is one thing that separates a motif that is a pleasure to quilt from one that fights you the whole way. Look at your design and ask whether you can travel the whole route without stopping and without backtracking. A motif with a one way, no stopping path is far easier to stitch, and choosing well here matters more than choosing something impressive.

Applique motifs make good quilting motifs, and you can rotate them or flip them to get variety without drawing anything new.

How close the quilting has to be

This is not a matter of taste. Your batting decides it, and the manufacturer states it on the packaging.

Some battings need quilting at intervals as tight as 3in to stop the fibers shifting and bunching after the quilt is washed. Others hold together with quilting as far apart as 10in. Check the batting before you plan the quilting, not after, because a beautiful open design on a batting that needs 3in spacing will fall apart in the wash and there is no fixing it afterward.

The same block quilted at two densities, one close enough for a batting that calls for 3in spacing and one open enough for a batting that allows 10in

The other half of the density question is balance. A quilt looks settled when the quilting is spread evenly across it. If one block is packed with stitching and the block beside it has three lines, the eye goes straight to the difference. That is the reason a well stitched design can still fall flat. You don't have to decide everything at the start: quilting the basic structure first, in the ditch and outlines, and then making the rest of the decisions as you go is a perfectly sound way to work.

Why your stitches come out uneven

Uneven stitches are not a machine fault. They mean your machine speed and your hand speed are not in agreement. Run the machine faster than feels natural and move your hands slower than feels natural, and hold both as constant as you can. This is the problem that practice genuinely fixes, and no setting on the machine will fix it for you.

How machine speed against hand speed sets stitch length: hands too fast gives long stitches, either speed drifting gives uneven stitches, and a fast machine with slow hands gives even stitches

Tension trouble looks different. When the bobbin thread is showing through on the top of the work, the top tension is too tight, so loosen it by selecting a lower number. When the top thread is showing through on the back, or worse, looping there, the top tension is too loose and wants a higher number. All of this is far easier to see when the bobbin thread is a different color from the top, which is a good reason to keep a contrasting bobbin in while you practice.

Cross section of a quilt sandwich showing balanced tension with the knot inside the batting, top tension too tight with the bobbin thread showing on the front, and top tension too loose with the top thread looping on the back

Skipped stitches usually point at the throat plate. Try the straight stitch one if your machine has it, then check that the needle is fitted correctly and that you have the right foot on. If it persists, rethread the machine from the beginning, check the bobbin area, and look at your tension again.

There is one more that has nothing to do with the machine settings. Lint builds up around the needle and under the foot as you quilt, and enough of it will start to affect your stitching. Glance at the needle area now and then and clear the fuzz away.

Marking, and when you can skip it

Meandering and stippling need no marking at all. That is the point of them. They are meant to be free flowing and a little random, and a marked line would only get in the way.

Motifs and repeat patterns do need marking. You can trace the design onto a light colored top before the layers go together, using a window or a light box, or use a plastic stencil and a removable marker after the sandwich is made.

Ask a few questions before you pick a marking method. How long will this quilt take, and will chalk still be there at the end? Are the fabrics dark, or busy enough that a marked line will vanish? Will the finished piece ever be washed? And if it is a method you haven't used before, test it first on a scrap of the same fabric, then wash it and press it and see what happens.

Taking it from the practice sandwich to a real free motion quilting project

Make up a few small practice sandwiches and use them. The goal for the first ones is not a design you would keep. It is to get comfortable with the movement before your first real free motion quilting project.

When you move to the quilt itself, a few habits make the difference.

Stabilize first. Quilting in the ditch around the blocks and borders before you start the decorative work holds everything where it belongs. If you don't want those lines to stay in the finished quilt, stitch them in water soluble thread and wash them out later.

Start and stop properly. Lower the presser foot where you want to begin, hold the end of the top thread, take one stitch, and pull that top thread to bring the bobbin thread up through the layers. That keeps the bobbin thread from being caught underneath in a nest. Then work a few stitches on the spot to secure, and do the same to finish before you trim.

Hold the quilt well. Place your hands in a C shape on either side of the presser foot and press down lightly to move the quilt around. Some quilters prefer to bunch the quilt into one hand and use the thumb and index finger of the other to encircle the stitching area. Either way, move the quilt, don't turn it.

Hands held in a C shape either side of the presser foot, the three steps for bringing the bobbin thread up through the layers, and stitches worked on the spot to secure each end

Support the weight. A large quilt hanging off the edge of the table will drag the stitching out of shape. Put a small table or an ironing board beside your machine to take the weight.

Plan for fewer stops. Quilting that runs in one continuous line, with as few starts and stops as you can manage, is easier to stitch and gives you fewer thread ends to bury.

Take the nine designs with you

The nine designs, the foot each one wants and where each one belongs are on a single sheet, with the machine setup, the stitch and tension checks and the batting spacing rule. It prints on letter or A4, and it is a reference sheet rather than a pattern, so nothing on it needs to print at actual size.

The downloadable PDF is here: the free motion quilting designs sheet. It is free to print, use and teach.

Free motion quilting questions we are asked most

Do you have to drop the feed dogs?

You have to stop them feeding, which usually means dropping them. If your machine won't drop them, covering them with a piece of thin cardstock taped to the throat plate does the same job. What you cannot do is leave them up and working, because then the machine is deciding where the fabric goes and you are fighting it.

What foot do I need?

A darning foot, sold under several names: free motion foot, embroidery foot, quilting foot. The thing that makes it the right foot is that it is spring loaded and moves up and down with the needle. An open toe version gives you a better view of the stitching.

What stitch length should I use?

Set the dial to zero. With the feed dogs disengaged, the dial has nothing to control. Your actual stitch length is decided by machine speed against hand speed, which is why consistency in both is what gives you even stitches.

What size needle should I use?

It depends on how thick your batting is. Start at 75/11 for a thin batting and move up to an 80/12 or a 90/14 for thicker ones. If you are using a specialty thread such as a rayon or a metallic, use the needle made for that thread.

What thread should I use?

Cotton in the top and cotton in the bobbin is the standard answer, at 40 or 30 weight for quilting. Monofilament nylon is the choice when you want the stitching to be nearly invisible. Never use hand quilting thread in a machine.

Do you backstitch when free motion quilting?

No. You secure the thread by working several stitches on the spot at the beginning and at the end. Backstitching is not available to you anyway with the feed dogs down.

What tension should I be at?

Balanced, which means the bobbin thread doesn't show on the front and the top thread doesn't show on the back. Most machines run fine at their standard setting. When they don't, adjust the top tension and leave the screw on the bobbin case alone.

What is echo quilting?

Repeated lines stitched outward from a shape, each one spaced off the one before it, rippling away like waves. It is a close cousin of outline quilting, which stops at one line.

How do I stop stitching myself into a corner?

Look ahead of the needle rather than at it, and use your traveling line. A meander or a loop design lets you wander back out to open fabric with a longer curve instead of stopping, cutting, and starting again somewhere else.

Should I practice on paper first?

For anything with a route to plan, yes. Draw the design a few times with a pencil until your hand knows where it goes next. Designs that cross their own lines are worth drawing before you stitch them, because they ask you to do something your hand will resist.

What to have ready

You don't need much, and most of it you already have.

A darning foot and a machine whose feed dogs drop or can be covered. A straight stitch throat plate if one came with the machine. New needles in the right size for your batting. Cotton thread for the top and the bobbin, plus a contrasting bobbin thread for practice so you can see what your tension is doing. Batting, cut at least 2in larger all around than the top, and backing fabric cut the same way, because quilting draws a quilt in. Safety pins, preferably curved, or a spray adhesive from the notions shelf for smaller pieces, and our walk through of basting a quilt at the table if you would rather not do it on the floor. And a few small practice sandwiches made from scraps.

Where to start

Make one practice sandwich about the size of a placemat. Drop the feed dogs, fit the darning foot, set the stitch length to zero, and meander across the whole thing without stopping to judge it. Then do a second one and try to keep your stitches the same length as each other. Then a third with loops in it.

Three practice pieces is usually enough to stop the movement feeling strange. After that the question stops being how do I do this and becomes which of the free motion quilting designs this particular quilt wants. Check what your batting says about spacing before you answer it, because that answer narrows the choice more than taste does.

More from us.All our step by step quilting guides, with the cutting charts and the diagrams, sit on one page: The Fabric Hut quilting tutorials.

Your Cart

"I only buy my blades from The Fabric Hut. I learned a long time ago, cheaper blades don’t last." - Shelby R.

Your cart is currently empty

You might like...