Skip to content

Welcome guest

Please login or register

Jingle Bell Rock: A Free Christmas Quilt Pattern for a Layer Cake and a Roll Up, 67 x 78

Twenty framed Christmas prints, a white roll up, and not a single triangle.

That's Jingle Bell Rock, a free Christmas quilt pattern designed by Kimberly Jolly for Robert Kaufman that finishes at about 67 by 78 inches. It has twenty 9 1/2 inch blocks in five rows of four, set in white sashing with three borders. Each block is a print square inside a narrow white frame inside a wider frame of a second print, so every block shows off two of the gingerbread men, penguins, snowmen and peppermints. It's cut from a 10 inch square pack and a Kona White roll up, with yardage only for the borders, and every seam is straight. The cover gives no skill level, but if you can sew a quarter inch seam and measure a block, you can make this one. Below you'll find the download, how the block goes together, how to shuffle the prints, and what we found when we checked the numbers.

Jingle Bell Rock quilt, twenty framed Christmas novelty prints with white frames and sashing, a green candy cane border and a red snowflake outer border

Free Jingle Bell Rock Quilt Pattern PDF Download

Six pages, free, designed by Kimberly Jolly and published by Robert Kaufman Fabrics. It features Jingle, a Christmas collection by Ann Kelle, with Kona White. The cover image is a digital mock-up, so the fabric placement in your quilt will differ.

Pattern: Jingle Bell Rock
Brand: Robert Kaufman Fabrics
Designer: Kimberly Jolly
Finished size: 67 1/4 x 78 1/2 inches as printed, about 66 3/4 x 78 once bound
Size: throw
Difficulty: not given on the cover; all straight seams, suitable for a beginner
Block: a 9 1/2 inch framed square block, a print center in a white frame and a print frame; 20 blocks in five rows of four with sashing
Technique: straight piecing, sashing, three borders, no triangles
Colors: forty 10 inch squares of Jingle prints in red, green, pink, aqua and black, Kona White, a green candy cane print for the middle border and a red snowflake print for the outer border
Precuts: layer cake friendly and jelly roll friendly. The blocks come from one 10 inch square pack and all the white from one Kona White roll up of 2 1/2 inch strips
You'll also need: binding fabric, which the pattern doesn't list (more on that below), and 4 7/8 yards for backing

Download the Jingle Bell Rock pattern PDF

How the Block Goes Together

The block builds from the center out, and each step adds a pair of strips to opposite sides.

Start with a 4 1/2 inch print square. Add white 1 1/2 by 4 1/2 inch strips to two sides, then white 1 1/2 by 6 1/2 inch strips to the other two, and you have a 6 1/2 inch unit with a 1 inch white frame. Add print 2 1/4 by 6 1/2 inch strips to two sides, then print 2 1/4 by 10 inch strips to the other two. The block measures 10 inches square and finishes at 9 1/2.

Check the size at every stage: 6 1/2 inches, then 10. With two frames in every block, a small error in each seam adds up fast.

Shuffling the Prints

The pattern's cutting looks simple, but how the squares are split decides how the quilt looks.

The 10 inch square pack has two squares of each of 20 prints. Split it into two stacks with one of each print. From every square in the first stack, cut two 2 1/4 by 10 inch strips. From every square in the second stack, cut two 2 1/4 by 6 1/2 inch strips and one 4 1/2 inch square. That gives each print enough for one full outer frame, plus one center square.

Then give each frame a center from a different print. That's what the cover does: the frames match on all four sides, but no block has the same print inside and out. Lay all twenty blocks out before you sew any of them, so the same print doesn't land twice in one row.

If your square pack doesn't come in matching pairs, pair squares that look alike, or let the frames go scrappy. Our fabric value, color and texture guide helps with picking a center that stands out from its frame.

We Checked the Arithmetic

We check the numbers of every pattern we publish. The block, the sashing and all three borders add up, and the pattern leaves out the binding.

The size is right. Four 9 1/2 inch blocks and three 1 3/4 inch sashing strips make a row 43 3/4 inches long with seam allowances, and five rows with four sashing strips make 55. The white inner border, the 2 inch middle border and the 8 inch outer border bring the top to 67 1/4 by 78 1/2. That's the size before binding; once bound, the quilt measures about 66 3/4 by 78.

The roll up covers all the white. The pattern cuts 26 of the 40 strips: ten trimmed to 2 1/4 inches and joined for the long sashing and inner border, four for the short sashing, and twelve for the 1 1/2 inch frame strips. That leaves 14 strips.

The borders have room. The middle border needs about 220 inches from six strips, which give about 250, and the outer border needs about 260 from seven, which give about 290.

There's no binding in the fabric list. The page ends with "quilt and bind as desired." The quilt measures about 289 inches around, and Yvonne adds an extra 20 inches to that for turning the corners, as she shows in our straight binding tutorial. That's about 310 inches, or eight 2 1/2 inch strips. You have two easy options: buy 5/8 yard of a binding fabric, or use eight of the 14 white roll up strips you have left over, which are already cut at 2 1/2 inches.

The backing just fits. The pattern asks for 4 7/8 yards, which is two lengths of about 88 inches, 84 by 88 side by side at 42 inches wide. That leaves about 8 inches at each side and 4 1/2 at each end. If you quilt on a longarm, check that against what your quilter asks for.

Fabrics and Palette That Suit This Pattern

The pattern dates from 2012, so read the SKU list as a guide to the look rather than a shopping list.

Novelty prints are the point of this quilt. The 4 inch centers are big enough to show a whole gingerbread man or penguin, and the white frame between them keeps busy prints from running together. Any Christmas layer cake will work, and so will a non holiday one if you want the same quilt for the rest of the year.

The white has to stay white. Use a true white or a very light solid for the roll up, because the white frames and sashing are what hold twenty different prints together.

If you'd rather start with the cutting done, our Holly precut-friendly kit and our Peppermint Poinsettias Christmas quilt kit are both Christmas quilts ready to sew.

For the back, our quilt backing fabric is 108 inches wide, so 2 1/2 yards covers this quilt with no seam.

If You Like This One

For another Christmas quilt from Robert Kaufman, Poinsettia Pavilion has twelve pieced poinsettias. For something quicker, the Holiday Joy table runner is a smaller holiday project. And Forest Fun is another quilt built around Ann Kelle novelty prints.

There are more in our free quilt patterns.

P.S. Lay out all twenty centers and frames before you sew. Swapping a center takes seconds on the floor and an evening with a seam ripper.

Your Cart

"I only buy my blades from The Fabric Hut. I learned a long time ago, cheaper blades don’t last." - Shelby R.

Your cart is currently empty

You might like...